We have a customer who lives in Johns Creek. Her fridge light doesn’t work. Do you have this problem too? When you open your fridge, is the food near the light source warmer as the rest of your food? It is an indicator that your refrigerator light doesn’t turn off when you close your fridge’s door.
Here is what we shared with our Johns Creek customer:
The Light at My Refrigerator Won’t Turn Off
If you have the same problem as our Johns Creek customer, then your fridge light doesn’t turn off at all. So let’s talk about it why the light won’t turn off.
How Do You Know Your Fridge Light Doesn’t Turn Off?
Most refrigerators come with some type of switch or a sensor that controls the light function when somebody opens the fridge door or closes it.
- Go ahead and look for the sensor. Either press or cover the sensor to see if it is controlling the light function in the right way.
- If the light stays on when you test it, then it is time for maintenance.
Check the Temperature of the Food Close to the Light
Determine whether the light is an issue by checking the food that sits close to the light source.
- Touch the food to see if it is cool as the other food in another area away from the light.
- Look for food that is warm or even hot. It is being heated by the light bulb while the door is closed.
- Food that is being affected will go bad quickly. Remove it from the fridge.
What If I Just Take The Bulb Out?
Until you find out what the actual issue is, you can just take the light bulb out.
What is the Function of the Fridge Light Bulb?
The light bulb allows you to see when rummaging around in your refrigerator. It is actually better for the quality of your food to take the bulb out, especially if it’s not turning off and heating up your food.
TIP: Cover the area where the bulb goes with tape or some kind of cover.
How Do I Fix This?
The problem is there are many small parts that can contribute to the refrigerator light isn’t turning off issue.
- Check for the issue in steps starting with the easiest to replace and move on to the harder parts.
- Always remember to unplug the refrigerator before replacing any parts or taking it apart, whether you’re simply changing a bulb or repairing a compressor noise
Check The Switch
When you’re testing out the light switch in the fridge door, see if there is some resistance or stickiness.
- Sometimes the switch can get sticky. Other times, it can have some calcium build up.
- The stickiness can be cleaned if you just remove the switch panel and wash it with some warm water and dish detergent.
Replace The Switch
Take the switch out and replace it with a switch that you bought either online or at a home improvement store.
- Take the switch out with a screwdriver or butter knife. The light bulb will just pop out.
- There should be one or two cords plugged into it, just unplug those and plug them into the new switch.
Replace The Bulb Socket
The switch isn’t the problem? Then you may need to replace the whole light bulb socket. Again, replacements can be bought online or from a home improvement store.
- The socket can be pooped out similarly to how it is done for the light switch as well.
- The socket will go in and connect like a wall plug in.
Bottom Line
Even our most reliable refrigerators need some love and care. If your fridge light won’t turn off when the refrigerator is closed like it happened to our Johns Creek customer, you may have an issue with your light switch, bulb socket, light sensor or even main control board.
To avoid any inconvenience caused by misdiagnosis, please call a reliable refrigerator repair service in Johns Creek – All Pro Appliance and Refrigerator repair service for a professional repair engineer to take care of your appliance.
To establish a better representation of the cause of the refrigerator problem in your case, call us at 678-765-7774 or submit a service request online and refrigerator repair service in Johns Creek would guide you further.